Lot number -14
Description Waste Recycling System Commissioned by First Grade Recycling Systems
2007 LJH 6 bay mobile picking station
LJH 6 bay mobile picking station converted to 3 phase electric / hydraulic drive 2007 with 3 phase electric / hydraulic drive - 18.5kw electric motor

ACME Finger Screen, 2019 Picking Station & 2017 Conveyor
ACME (taken over by General Kinematics) finger screen Approx 13.45m long x 1.25m wide (2.1m at feed hopper end) on steel lattice support structure - 15kW Electric motor. Fingers will pass 1/2 house brick and smaller to lower deck . Includes spare finger plates.
* 2019 Picking cabin (over finger screen) 8m wide by 2.7m wide picking cabin, approximately 8m long, 2.7m wide, on same slope as screen. 1m wide walkway along-side screen, with 8 steps of 1m long x 158mm rise each. Insulated Kingspan cladding on roof and far side. With 3 double glazed windows on near side, with 4mm steel plate below. One double glazed window on loading end, with mesh protection on outside. 4mm steel plate over whole roof for protection, with gutter at lower end. Two picking chutes 1.4m wide each through near side as shown. With 750mm wide staircase for access with handrails both side, and landing platform before door. Steel door 750 wide to cabin, with window. With butcher strips on exit, and 600mm below entrance to cabin. With bolt in step to assist climbing onto screen. Two fluorescent lights in Cabin, and one heater Emergency stop pull cord mounted on ceiling, with drop down pull cords. With manually operated beacon both inside and outside to alert loader operator.
* 2019 Steel bays X 2 steel bunker walls, to form two bunkers for picked materials, each 3.2m wide x 3m deep, and height sloping form 2.5m high. Constructed from 152mm Channel, with 6mm plate at bottom, and 4mm plate at top
* 2017 Lower Deck Discharge Conveyor 4.2m long, with 28 deg crank as shown, 950mm wide 3 ply flat rubber belt (cross stabilised) , 3kW motor drive, 340mm diameter lagged head drum, self cleaning tail drum, sides to suit Screener, and support legs to ground.

2017 Tema - Liwell Flip Flow Screen, Overband Magnet & Conveyors
* 2017 Tema - Liwell Flip Flow Screen Type KT 1.0- 4.0/16 EDS Double Deck Upper deck fitted with WS85 Screen media system and sizing at a nominal 50mm, with PU sidebar protection. Lower Flip Flow Screen Deck, consisting of 16pcs. Flexible screen mats 1000mm x 290mm x 5mm, with apertures to make an 8mm product. 11kw, electric motor and v belt drive.
* 2017 Overband magnet (over Elevator) Master Magnets 12PCB6R ceramic magnet overband magnet and support structure - electric motor driven
* 2017 Reversible conveyor (feeding onto Liwell Flip-Flow Screen) 3.6m long, 900mm wide 3 ply flat rubber belt, 3kW motor drive, 340mm diameter lagged head drum, self-cleaning tail drum, with high sides and covers. Supported on frame over bunker walls.
* 2017 Feeder Elevator 900mm wide, 6.8m. with electric motor drive, Endless 3 ply rubber chevron belt. . Loading over sloped edge, approx 3.3m high
* 2017 Elevator 11.4m long, 900mm wide 3 ply chevron rubber belt, 4kW motor drive, 340mm diameter lagged head drum, self-cleaning tail drum, with stainless steel section for magnet, covers, and support legs to ground at feed end, and supports off bunker walls at discharge end.
* 2017 Steel bunker (under reversible belt and Flip Flow Screen) Steel bunkers under flip-flow screen and reversible conveyor, and magnet as shown to form fines bunkers, and base frame for Flip Flow Screen and conveyor. Bunker 2.3m high and 4.0m wide. Constructed from 152mm Channel, with 6mm plate at bottom, and 4mm plate at top.
* 2017 Support Structure & walkway (under reversible belt and Flip Flow Screen) Steel support structure for reversible belt and Tema Liwell screen including maintenance walkways and corrugated roof
* 2017 Electrical control panel - 2 (centre cabin) Control gear for front end components. (items 1 - 3)

2014 Picking Station & Conveyors
* 2014 Picking cabin (centre) 4m long for single sided picking, with Kingspan insulated cladding, fresh air ventilation, heater, double glazed windows, and 3 picking chutes.
* 2014 Picking Belt - centre picking cabin 6.6m long, 900mm wide with 3 ply flat rubber belt, 2.2kW motor drive, lagged head drum, self cleaning tail drum, belt scraper hopper, and supports.
* 2019 Light waste conveyor 4.7m long, 600mm wide with tracked and endless PVC belt, kW motor drive
* 2014 Bays (in front of centre picking cabin) 3 X 3.2 X 1.5m high Bays x 2 bays + 1 additional panel
* 2017 2nd Crossbelt 4.2m long, 950mm wide with 3 ply flat rubber belt, 3kW motor drive, lagged head drum, self cleaning tail drum

2018 Mid Air Knife, 2014 Oversize Air Knife, ACME Deck Screen, Overband Magnet, Conveyors & Bays
* 2014 ACME (taken over by General Kinematics) Deck Screen 9m X 1.2m Deck screen with 75mm punched plate top deck plates and 14mm polyurethane / rubber lower deck meshes - 11kw electric motor. Complete with chutes, concrete support block and maintenance platform
* 2014 Overband Magnet Master Magnets 10PCB6R ceramic magnet overband magnet and support structure - electric motor driven
* 2018 Mid Air Knife 15kw fan on pivoting support structure
* 2014 Oversize Air knife 15kw fan on pivoting support structure
* 2014 Elevator 2 - 32 Metres 900mm wide with 7.5kW motor drive, lagged head drum, self cleaning tail drum. Endless 3 ply rubber belt.
* 2014 Bay walls - Fines bay
* 2014 Mid conveyor 1 3.8m long, 600mm wide 3 ply flat rubber belt, 3kW motor drive, 340mm diameter lagged head drum, self-cleaning tail drum.
* 2014 Oversize conveyor 1 - 4.8m long, 900mm wide 3 ply flat rubber belt, 3kW motor drive, 340mm diameter lagged head drum, self-cleaning tail drum.
* 2018 Mid conveyor 2 - 13.2m long, 600mm wide with 3 ply flat rubber belt, 4kW motor drive, lagged head drum, self cleaning tail drum, belt scraper hopper, and supports.
2018 Oversize conveyor 2 8.2m long, 900mm wide with 3 ply flat rubber belt, 2.2kW motor drive, lagged head drum, self cleaning tail drum, belt scraper hopper, and supports.
* 2018 Bay walls - Spare bay + lights bays x 2 Steel bunkers under new picking cabin as shown. Bunker 2.3m high and 4.0m wide. Constructed from 152mm Channel, with 5mm plate at bottom, and 4mm plate at top

2018 Picking Station
* 2018 Picking cabin (rear end) 5.2m long, 3.4m wide, with Kingspan insulated cladding, double glazed window, fresh air ventilation, lights and heaters. With 4 picking chutes as shown. 1.2m long landing platform outside cabin, and hooped ladder at 15 deg for access to picking cabin.
* 2018 Mid rear-end picking conveyor 14.4m long, with 16 deg bend, 650mm wide with 3 ply flat rubber belt, 4kW motor drive, lagged head drum, self cleaning tail drum.
* 2018 Oversize rear-end picking conveyor 11.2m long, with 16 deg bend, 950mm wide with 3 ply flat rubber belt, 4kW motor drive, lagged head drum, self cleaning tail drum.
* 2018 Bay walls - 4off bays under rear end picking cabin 3m high and 4.0m wide. Constructed from 152mm Channel, with 6mm plate at bottom, and 4mm plate at top.
* 2014 Electrical control panel - 1 (rear end) Main Control panel including PLC (central controller and items 4 - 6)
Reference CS1-3
VAT Status Commercial Plus VAT